Manual configuration
This chapter describes how to set UAD settings, create PBXware extension and register the
phone.
The following topics are covered:
UAD settings
Creating extension
Registering phone
UAD Settings
UAD settings
Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
UAD settings
Navigate to Settings:UAD.
Make sure Htek UAD is enabled. To check the UAD status click on the edit icon corresponding
to your Htek phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.
The standard options window will be shown below.
Need help?
Do you have a question about the UC923 and is the answer not in the manual?