EasyIO FW Series Connectivity Manual page 28

EasyIO FW Series – Network Connectivity v2.0
IPv6 DNS
Enable
SSID
Wireless
Settings
Password
DHCP Settings
DHCP Server
(IPv4)
DHCP Start Address
DHCP Limit
DNS server
DNS IP address
Configuration Network
Configuration network is the secondary SSID network configurations.
** Remember to Save any changes and perform a Reboot for the new configurations to take effect**
Property
Network Settings
IP address
Subnet Mask
Wireless Settings
Hidden
SSID
Password
IPv6 DNS route address.
Enable or disable the Wi-Fi network broadcasting.
Main SSID name. By default it is named as FW-xxxx where xxxx is the
last 4 digit of the MAC address.
User configurable.
Password of main SSID , max 32 characters.
Check box to enable or disable the IPv4 DHCP server.
Be careful when enable it.
Starting IPv4 DHCP address. Default is 100.
Total IPv4 DHCP Lease. Default is 100.
IPv4 DNS route address.
By default it is set to google.com DNS which is 8.8.8.8
Most of the time the Google DNS will work.
You might need to change it according to your own network DNS.
For example some routers require its connected device needs the
router IP address to be its DNS server IP in it.
Description
IP address of FW secondary SSID
Subnet Mask of FW secondary SSID
DHCP server is always enable for secondary SSID.
This make it easy for installer to connect to this SSID without the need
to know the FW IP address range.
Hide or unhide the Wi-Fi network broadcasting.
This property only applies to the secondary SSID.
By default it is hidden.
Main SSID name. By default it is named as Conf-xxxx where xxxx is the
last 4 digit of the MAC address.
User configurable.
Password of secondary SSID
28