Advertisement
Quick Links
Advertisement
Related Manuals for EasyIO FG Series
Summary of Contents for EasyIO FG Series
- Page 1 FG Series SMS v1.1 EasyIO FG Series and FS Series SMS User Guide...
- Page 2 FG Series SMS v1.1 Document Change Log July 2016 Document created. Dec 2018 Updated disclaimer and support channel emails addresses Updated images to reflex CPT Tools...
- Page 3 While every effort has been made to assure the accuracy of this document, EasyIO Holdings Pte Ltd is not responsible for damages of any kind, including without limitation consequential damages, arising from the application of the information contained herein.
- Page 4 FG Series SMS v1.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 5: Table Of Contents
FG Series SMS v1.1 Table of Contents Introduction ................................... 6 Prerequisites .................................. 6 Hardware configuration limitation ..........................6 Configuring the SMS Service ............................7 Configuring SMS object..............................11 Configure the Axeon TCP modem to user preference ....................14 Technical Support ................................ 16... -
Page 6: Introduction
1. CPT Tool dated 16 Dec 2016 or later. 2. FG Series firmware version v1.5b50 or later (EasyIO FG) and v2.0b50 or later for (EasyIO FG+) is required for best performance. 3. For FS Series, firmware has to be V3.0b50 or later. -
Page 7: Configuring The Sms Service
Step 2 Choose easyioFGSms from library. Drag & drop the SmsService object into your App. The object can be dropped in the EasyIO folder or a new folder can be created for the SMS service. In the example below, the object is dropped into a new folder named “SMS”. - Page 8 FG Series SMS v1.1 Step 3 Click at the SMS Service to access the properties at the property side bar. Enable the SMS service. Configure the TCP modem IP address. The default IP address for the TCP modem is 192.168.10.154.
- Page 9 FG Series SMS v1.1 Step 4 The modem status will display the connection OK and signal strength represents the mobile network signal coverage. Step 5 Select and drag a SMSRecipient object from the EasyIOFGSms library. Drop it under the service object.
- Page 10 FG Series SMS v1.1 Step 6 Click at the recipient object to configure the recipient properties. Enter the owner name for reference. Enter the mobile number including the country dial code. In the example below the mobile number is Malaysia Mobile number with the prefix +60 as the dialing code and 122525343 as the mobile number.
-
Page 11: Configuring Sms Object
FG Series SMS v1.1 Configuring SMS object. The architecture of the SMS service is a tiered, parent/child structure as indicated below. The service object can be placed anywhere in the Sedona apps. It is recommended to create a separate folder for each service to allow logical identification of each “parent”... - Page 12 FG Series SMS v1.1 Step 3 A valid value is to be linked to the SMS alarm object within the apps. In the example below, a Boolean Writeable object is linked to the input property of the BoolAlarm object. Image above shows a link from the WriteBool object is linked to the SMS alarm object.
- Page 13 FG Series SMS v1.1 Step 4 If SMS is successfully sent the totalSendToday property will count up. The last send messages property will display the last SMS sent. Step 5 Example of an SMS received in the mobile phone is displayed as below.
-
Page 14: Configure The Axeon Tcp Modem To User Preference
FG Series SMS v1.1 Configure the Axeon TCP modem to user preference The Axeon TCP modem is shipped to customers pre configured. If users need to configure to their personal preference such as preferred IP address, preferred TCP port a 3 party software tool is needed. - Page 15 FG Series SMS v1.1 Step 5 At the device manager Auto Discovery tab will display the Axeon TCP modem including the IP address. Select the Axeon TCP modem by clicking the IP address in the list. Click at the Change IP button to enable IP changes.
-
Page 16: Technical Support
FG Series SMS v1.1 Technical Support For technical support issues please contact technical support person as below; Worldwide and Asia Pacific Support support@easyio.com Americas Support support@easyio.pro Europe Support support@easyio.eu...