Rear Brake Light Switch Adjustments; Drive Chain Tension - Royal Enfield THUNDERBIRD 350 Owner's Manual

MINOR MAINTENANCE TIPS

REAR BRAKE LIGHT SWITCH ADJUSTMENTS

 The brake light glows once you press the brake
pedal. If brake light is not glowing, check the
brake light switch wire connection, bent/broken
switch spring and connection with brake pedal.
If above are o.k., then do the adjustments as
mentioned below:
T ighten / loo sen the

adjus ting nut o n the
brake light switch such
that the br ake lam p
comes on when the pedal
is depressed by 25 mm.
DRIVE CHAIN TENSION (Free Play 25-30mm)
 Place motorcycle on its center stand on a firm &
flat surface.
Measure the drive chain free play on the top run

of the chain.
The recommended free play is 25 to 30 mm.

Adjustment nut
4 3
Adjuster Lock nut
Drive chain slack
adjusting nut
Index mark
Swing arm reference mark