Vibration Damping System - Husqvarna 543 XP Workshop Manual

7.18 Vibration damping system

Dismantling
Remove the plastic lids and rubber dampers on
both sides. See figures 48-49.
Cleaning and inspection
• Clean and inspect all parts carefully. If there
are any cracks or other defects, replace the
damaged parts with new ones. Always use
original parts.
Assembly
Fit the rubber dampers and plastic lids on both
sides. See figures 48-49. Tightening torque
2,5 - 3,9 Nm
Fig 48
Fig 49
Repair Instructions
45
English -