Vibration Damping System; Dismantling The Piston And Cylinder - Husqvarna T435 Workshop Manual

Repair instructions

7.22 Vibration damping system

Dismantling
1. Dismantle the following parts:
• Chain and bar, see the operator' s manual.
• Handle unit.
2. Dismantle the springs as shown in fi gures 70, 71
and 72.
Cleaning and checking
Clean and inspect all parts.
Assembly
1. Assemble the springs as shown in fi gures 70,
71 and 72.
Note! Springs with greater resistance are available,
but must only be used together with longer bars.
See the spare parts list for spare part number.
2. Assemble the following parts:
• Handle unit.
• Chain and bar, see the operator' s manual.
7.23 Dismantling the piston and
cylinder
1
Dismantle:
• tank unit, see chapter "Dismantling the intake
system".
• ignition module and fl ywheel
• pump unit
Dismantle the inlet bellows, see chapter "Dismantling
the inlet bellows".
2
Dismantle the muffl er, see chapter "Dismantling the
muffl er".
48
– English
Fig 70
Fig 71
Fig 72
Fig 73