Settings On The Printer; End Print Signal Mode Settings; Mode Setting For Start Print Signal - Epson CW-C6000 Series Technical Reference Manual

Settings on the Printer

This section describes items that can be set from the printer operation panel.
All items can be set from the PC utility (PrinterSetting).

End Print Signal Mode Settings

The settings are as follows.
Setting value (mode)
Disable end print signal
Mode 1
Mode 2
Mode 3
Mode 4

Mode Setting for Start Print Signal

The settings are as follows.
Setting value (mode)
Disable
Pulse mode
Level mode
Turn the end print signal OFF. (End print signal not output)
Set the end print signal (pin 18) as follows: Normal: High,
When feeding paper: Low.
Set the end print signal (pin 18) as follows: Normal: Low,
When feeding paper: High.
Set the end print signal (pin 18) as follows: Normal: High,
When continuous printing ends and the printer stops at the predetermined position: Low
for 20 msec.
Set the end print signal (pin 18) as follows: Normal: Low,
When continuous printing ends and the printer stops at the predetermined position:
High for 20 msec.
Turn the start print signal (pin 10) OFF.
(Normal print mode in which the printer receives and prints data, without using the start
print signal input to the external I/O.)
Set the start print signal (pin 10) to the following mode:
Print labels when a Low signal is input for 20 msec or longer.
Set the start print signal (pin 10) to the following mode:
Print labels as long as a Low signal is input.
Chapter 6 Settings on the Printer
Description
Description
6
53