Avaya ERS 3500 Series Manual page 37

Caution:
Risk of equipment damage
Connect 1000BASE-BX SFP AA1419076-E6 to 1000BASE-BX SFP AA1419077-E6 using
a single mode fiber with at least 6 dB of attenuation. Damage can result if insufficient
attenuation is provided or if the same 1000-BASE-BX SFPs are connected.
Table 17: IEEE 802.3ah 1000BASE-BX40 SFP specifications
Connectors
Data rate
Line rate (8B/10B code)
Distance
Wavelength
Link optical power budget
Maximum transmitter and dispersion power
penalty
Transmitter characteristics
Maximum launch power
Minimum launch power
Receiver characteristics
Maximum receiver sensitivity
Maximum input power (maximum average
receive power)
1000BASE-EX DDI SFP specifications
The following table describes the 1000BASE-EX DDI SFP. This SFP operates at 1550 nm and
has a reach of up to 120 km. The part number of this SFP is AA1419071-E5.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 14 dB of attenuation exists
between the transmit and receive ports.
To attain the BER of 10
is 15 dB.
Installing the SFP, SFP+, and XFP transceivers on Avaya ERS 3500 Series
Parameter
-12
, the minimum attenuation between the transmit and receive ports
Specifications
Single-fiber LC
1.0 Gb/s
1.25 Gb/s
Up to 40 km with SMF
1310 nm and 1490 nm
20.0 dB
3.3 dB
3.0 dBm
– 3.0 dBm
– 23 dBm
– 3.0 dBm
SFPs
March 2014 37