Avaya ERS 3500 Series Manual page 34

SFP specifications
1000BASE-ZX CWDM SFP specifications
The 1000BASE-ZX SFPs provides CWDM gigabit Ethernet connectivity using single mode
fiber. These SFPs support full-duplex operation only. The part numbers of the 70 km models
range from AA1419033-E5 to AA1419040-E5.
Important:
For the 70 km CWDM SFPs, a minimum attenuation of 10 dB must be present between the
transmitter and receiver.
Important:
These SFPs are no longer available for purchase, but are still supported in Release 5.1.
Table 13: 1000BASE-ZX CWDM (70 km) SFP specifications
Connectors
Cabling
Data rate
Line rate (8B/10B code)
Operating temperature range
Link optical power budget
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum input power
1000BASE-ZX DDI SFP specifications
The following table describes the 1000BASE-ZX DDI SFP. This SFP operates at 1550 nm and
has a reach of up to 70 km. The part number is AA1419052-E5.
Caution:
To prevent damage to the optical receiver, ensure that at least 5 dB of attenuation exists
between the transmit and receive ports.
Table 14: 1000BASE-ZX DDI SFP specifications
Maximum electrical power consumption
Connectors
34 Installing the SFP, SFP+, and XFP transceivers on Avaya ERS 3500 Series
Parameter
Parameter
Comments? infodev@avaya.com
Specifications
Duplex LC
1.0 Gb/s
1.25 Gb/s
0 to 60C
20 dB
– 3.0 to 2.0 dBm
– 23 dBm
– 3.0 dBm
Specification
1.0 W
Duplex LC
March 2014