Installing The Ultrasparc-Ii Module; Updating The Flash Prom; Removing The Ultrasparc Module - Sun Microsystems Ultra 2 UltraSPARC-II Upgrade

Hide thumbs Also See for Ultra 2 UltraSPARC-II:

Table of Contents

C H A P T E R

Installing the UltraSPARC-II

Module

3.1

Use Sun™ Flash PROM Guide for Workstations and Workgroup Servers -

Standalone Version, part number 802-3233, for updating your system's flash PROM.

3.2

The Sun Ultra 2 system can now support a 400-Mhz CPU if the motherboard is part

number 501-3132-13 or higher.

Note –

The motherboard part number is located on the right front side of the

motherboard. See

stamp.

Skip this section and read Section 3.3, "Installing the UltraSPARC-II Module," on

page 3-3." if your system is already equipped with one UltraSPARC-II module and

you are adding a second module of the same clock frequency.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

on page 8 to locate the motherboard part number

FIGURE 3-6

3-1

Table of Contents

Need help?

Do you have a question about the Ultra 2 UltraSPARC-II and is the answer not in the manual?