Advertisement
EasyTouch/IntelliTouch Control System Upgrade Kits Installation Guide
Figure 11. IntelliCenter™ Control System Circuit Board
Installing the Wiring Label on the Enclosure Front Door
1. Remove the backing from the wiring label.
2. Affix the wiring label ((10), P/N 522612) onto High Voltage Cover panel. See Figure 12.
3. Close the front door and secure with the latch.
4. Switch ON AC POWER to the load center at the circuit breaker.
Figure 12. Load Center shown (2012 or later)
AUX5 AUX6
AUX7 AUX8 AUX9
(with optional Expansion Boards shown)
Wiring Diagram label for IntelliCenter Control System Upgrade Kit.
*522612*
Place label onto
High Voltage
Cover panel
Note: Refer to page 3 where (parts index number) is shown
11
Advertisement
