Royal Sovereign RSAC-1217S Operating Manual page 13

INSTALLATION: OUTDOOR UNIT
Wiring Connection
1. Loosen the screws and remove the E-parts cover
from the unit.
2. Connect the cables respectively to the corresponding
terminals of the terminal board of the outdoor unit
(see the wiring diagram), and if there are signals
connected to the plug, just conduct a butt joint.
3. Ground Wire: Remove the grounding screw out of the
electric bracket, cover the grounding wire end onto
the grounding screw and screw it into the grounding
hole.
4. Fix the cable reliably with fasteners (Pressing board).
5. Put the E-parts cover back in its original place and
fasten it with screws.
Wiring Diagram
NOTE:
• This manual usually includes the wiring mode for the different kind of A/C.
We cannot exclude the possibility that some special type of wiring diagrams
are not included.
• The diagram are for your reference only. If the entity is different with this
wiring diagram, please refer to the detailed wiring diagram adhered on the
unit which you purchased.
13