Powering Up The Dvr - ESP WITNESS DVR4 User Manual

P owering up the DVR
O nce the DVR has been properly installed (please refer to pages 15-18 for further
d etails on DVR installation) the unit is ready to record and display. Apply power and
s witch on.
Following
takes a few seconds checking
the H DD , the message shown
on the right will be displayed:
The DVR will enter into real-time
Display Mode as shown on the right.
A fter initial settings are restored
th e message on the right will
b e displayed on screen.
T urn off the DVR and re-start it.
power on, the DVR
NOTE
HDD CHECKING
Turn off the DVR and turn it
back on again.
9
OK
原圖