Magliner Coolift CPA Series Service Manual page 31

25) Tighten the two #10-32 screws and lock nuts found on the clutch anti-rotation bracket and top diagonal brace.
26) Adjust the outer screws on the motor adjustment plates until the chain has 1/4" of play between the two sprockets.
Make sure that the motor adjustment plates are the same distance apart from the differential mount block (see page
27). Tighten the jam nut on the motor adjustment plate.
27) Fully tighten the hex head cap screws on motor and clutch adjustment plates.
28. Replace the drivetrain cover. Plug the lift motor into the controller. Reconnect the batteries.
29. Turn on the unit. Carefully test propulsion to make sure the CooLift drives in the intended direction.
LH (standing
behind CooLift at
the user handles)
F
H
I
1-800-MAGLINE (624-5463)
A
B
C
A
G
D
E
J
RH (standing behind
CooLift at the user
handles)
Reinforcement plate needs to be moved inward or
rotated to be removed from the frame rail "lip."
BE CAREFUL once these are removed as these plates
support the differential assembly! Use two people for
easier removal.
A
B
C
D
E
F
G
H
H
I
J
K
Page 31
E
Item
Hex socket head cap screw -
5/16"-18 x 1" long
Frame top brace
Frame bottom brace
Differential assembly
Reinforcement plate
Hex socket cap screw - 3/8"-16
x 1-1/4" long
Hex lock nut - 3/8"-16
Differential mount assembly
Hex head cap screw - 5/16"-18
x 4-1/4" long
Differential drive sprocket
Hex lock nut with flange -
5/16"-18
www.magliner.com
CooLift
®
Qty. Part No.
8 80011
1 309445
1 309614
1 309622
2 309444
8 80132
8 80603
2 309681
4 80134
1 309442
4 80627