Advertisement
Quick Links
For the latest User Installation Guide please visit: www.ergotron.com
User's Guide - English
Guía del usuario - Español
Manuel de l'utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l'utente - Italiano
Användarhandbok - svenska
ユーザーガイ ド : 日本語
用户指南 : 汉语
888-97-352-G-00 rev. B • 05/14
Single Monitor Tall User Kit
User's Guide
for WorkFit, A & S Products
1 of 7
Advertisement
Related Manuals for Ergotron Single Monitor Tall User Kit
Summary of Contents for Ergotron Single Monitor Tall User Kit
- Page 1 User's Guide Single Monitor Tall User Kit for WorkFit, A & S Products For the latest User Installation Guide please visit: www.ergotron.com User's Guide - English Guía del usuario - Español Manuel de l’utilisateur - Français Gebruikersgids - Deutsch Benutzerhandbuch - Nederlands Guida per l’utente - Italiano...
- Page 2 WARNING: Weight Capacity Restriction! Make sure the total combined weight of Display and Single Monitor Tall User Kit is less than the specifi ed weight capacity of the product you are attaching to. Failure to follow this warning will create an unstable situation that may result in product damage and/or personal injury.
-
Page 3: Features And Specifications
Features & Specifi cations 100mm (3.94") 50mm (1.97") 75mm (2.95") 50mm (1.97") 75mm 50mm (1.97") (2.95") 50mm (1.97") 75mm (2.95") 50mm (1.97") 75mm (2.95") Tools Needed Components M3x6mm M4x10mm M4x12mm M4x28mm M4x10mm M4x30mm 888-97-352-G-00 rev. B • 05/14 3 of 7... - Page 4 Attach Portrait/Landscape Lock-out screw. M3x6mm 0° WARNING: Portrait/Landscape Lock-out screw MUST be installed! Make sure the P/L Lock-out screw is installed before attaching the Single Monitor Tall User Kit. Failure to follow this warning will create an unstable situation where the display may rotate causing product damage and/or personal injury.
- Page 5 Attach display. WARNING: Make sure you use the specifi ed screws for each connection point. Using incorrect screws may cause product damage or create an unstable situation that could lead to product damage and/or personal injury. WARNING: Do not over tighten screws. Over tightening screws may cause product damage. 100x100mm Mounting Holes 150mm 100mm...
- Page 6 NOTE: User spacer and specifi ed screws if your display has recessed mounting holes. 100x100mm Recessed Mounting Holes 150mm 100mm (5.91") (3.94") M4x30mm CAUTION: Use these longer screws only when going through 2 plate M4x28mm M4x28mm thickness. 75x75mm Recessed Mounting Holes M4x28mm 888-97-352-G-00 rev.
-
Page 7: Service And Warranty
Break • 2 to 3 minutes every 20 minutes • 15 to 20 minutes every 2 hours. Service and Warranty For local customer care phone numbers visit: http://contact.ergotron.com NOTE: When contacting customer service, reference the serial number. 888-97-352-G-00 rev. B • 05/14...
Need help?
Do you have a question about the Single Monitor Tall User Kit and is the answer not in the manual?
Questions and answers