Advertisement
Connecting up
to the Tel-
ephone Line
1.
Insert the line cable into the socket labeled
"ISDN".
2.
Connect the other end to your telephone line.
Connecting the
Power and
Switching on
5
1.
Insert the power cable into the socket
located at the rear of the machine.
2.
Plug in the cable to the mains.
Warning
T Power requirements : 220-240V, 50/60Hz
T Insert the power plug securely into the wall socket.
T Make sure that the wall outlet is near the machine
and readily accessible.
T Do not connect other equipment to the same socket.
3.
Turn the power switch on.
Keep going...
Initial Settings &
Adjustments
6
Before using the machine, please adjust the fol-
lowing settings:
• G3 Own Number
• G4 Own Number
• RTI (Remote Terminal Identification), TTI (Trans-
mitter Terminal Identification), G4 TID (Termi-
nal ID), and IG3 CSI.
• Date & Time
To enter letters, use the A-Z keys (Quick Dial 01-
26). To enter a space, press Quick Dial 27. To
enter symbols, press Quick Dial 28. To enter dig-
its, use the ten key pad.
Note
THow to adjust the items for ISDN, see the section
titled "ISDN" in the fax manual.
1.
Press the [Function] key and [6], enter the
access code [2][2][2][2], then enter [6][1].
INITIAL MODE Y/NEXT V
61 INITIAL SET
2.
Press the [Yes] key.
Y/NEXT V
SET G3 OWN NUMBER
3.
Press the [Yes] key again.
G3 OWN NO.
7
4
KPAD
Advertisement
