Advertisement
Installing the
Main Paper
Cassette
1.
Unpack the cassette.
2.
Peel off the 3 pieces of tape from the
cassette cover. Remove the card that is
holding the metal base plate down.
3.
Raise the cassette cover.
4.
If necessary, adjust the paper size.
Note
T To change the paper size in the cassette, see "Chang-
ing the Paper Size in the Main Cassette" in the fax
manual.
5.
Set the paper then lower the cassette
cover.
Note
T The frosted side of the cover must be face up when
2
closed.
6.
Install the cassette. Push it in firmly until it
locks into place.
Attaching the
Quick Dial Sheet
And Operation
Panel Sheet
1.
Fit the Quick Dial Sheet and Cover Sheet over
the Quick Dial keys.
2.
Fit the 3 Operation Panel Sheets as shown.
3
2
Advertisement
