Lionelo Lennart User's Manual & Warranty Card page 15

1. Join tips of the harness (13).
EN
2. Insert them into the central part of the buckle (14) until
you can hear a „click".
3. Check if the harness has been secured properly – try to
pull them.
To undo the belts, press the red button on the buckle (14).
Both tips will pop out. Pull them and separate.
The harness must fit tight and be adapted to child's body.
They must not cause discomfort. The belts must not be
twisted.
How to loosen and tighten the harness
To provide your child with top safety (when the child is in the
child restraint and when harness has been fastened), make
sure the belts have been adjusted properly – they should fit
tight your child's body. Safety belts must not be twisted or
loose.