Product Overview; Features - Epson UB-E03 Technical Reference Manual

Product Overview

This chapter explains the product overview.

Features

The UB‐E03 is installed in the TM‐series printers as an interface board to provide Ethernet
communications.
Features of the UB‐E03 are as follows:
Network Function
• 10Base‐T, 100Base‐TX Ethernet
• Supports TCP/IP protocol.
• Supports DHCP/APIPA.
• SNMP capable. The status of the printer can be acquired by using SNMP.
• IPv4 capable.
Setting
• The setting utility EPSON TMNetWinConfig is available. Please download it from the EPSON
Web site and use it.
• You can check and set the parameters by using a Web browser.
• When you push the push button, the present network parameter is initialized and the setting
condition is printed for you to check.
Others
• Updating the firmware is possible via the network.
• Low‐power consumption mode
Low-power consumption mode:
The UB-E03 enters the low-power consumption mode if more than 3 seconds have passed
while none of the following is performed;
• Receiving Ethernet data
• Printing by the printer
• Receiving data from the printer
• Operating the push button
When any of the above is performed, The UB-E03 automatically returns to the normal
mode. The low-power consumption mode function cannot be disabled.
Chapter 1 Product Overview
1
9