Epson UB-E03 Technical Reference Manual page 53

• SNMP: SNMP is used to acquire the status and make settings for the module or printer
by custom or general purpose MIB tool.
SNMP Version
Transport Protocol
Server Port Number
Trap Sending Port Number
Trap Destination
Supported MIB type
Supported PDU type
Community
• ENPC: ENPC is used to acquire the status and make settings for the module or printer.
Protocol
UDP port number
Compatible packet types
• TFTP: TFTP is used to update the firmware of the UB-E03. The following methods are
available for the update.
∗ Using the dedicated update utility
∗ Using the TFTP command
Protection with a password
You can set a password for protecting the set content.
User Name
Password
The password set by the EPSON TMNet WebConfig function is used as a password when
setting by using the EPSON TMNet WebConfig.
SNMP v1 (RFC1157) compliant
(SNMP v2 not supported)
UDP/IP
161
162
Up to two settable IP addresses
Part of MIB-II (RFC1213), Part of Host Resource MIB,
Part of Print Server MIB, Part of Printer MIB
Get Request, Get Next Request, Set Request, Get Response,
Trap
Each community name can be set with 16 ASCII characters
or less.
UDP/IP
3289
Probe, Initialize, Query, Setup, Notify
"epson" (User name cannot be changed.)
Default
Type of characters settable
Number of characters settable
Chapter 4 UB-E03 Specifications
:Undefined
:ASCII characters
:Maximum 20
4
53