Setting Ip Address Using Arp/Ping Command - Epson UB-E03 Technical Reference Manual

Setting IP Address Using arp/ping Command

You can set the IP address using the arp/ping command. This way of setting is available with the
host, which is in the same segment as that of the UB‐E03.
Preparing the computer and acquiring the information
Preparation
• TM printer with the UB‐E03 installed
• Computer (Windows 7/Windows Vista/Windows XP)
Acquiring the setting information
Acquire the following information from the network administrator.
• IP address
• Default gateway
The subnet mask is set from the IP address automatically.
Setting procedure
Follow the steps below to set the IP address.
Do not use the same IP address as that of other network devices or PCs.
In this example, we set the IP address of the UB‐E03 (MAC address: 00‐26‐AB‐7B‐00‐00) to
192.168.192.168 in Windows.
1
Set the gateway address to the computer in which you will input the
arp/ping command.
If a server or router acts as a gateway, type the gateway address.
2
Connect the printer to the network and turn on the printer.
3
Execute the arp command to clear the relation of the MAC address and
IP address.
<Example>
Format: arp -d [IP address to be set for the UB-E03]
Input:
arp -d 192.168.192.168
Chapter 2 Set up
2
27