Models; Series Change - Graco XP-hf 572407 Instructions Manual

Models

Models
Using an XP-hf system, or components on the system,
not approved for hazardous locations or explosive
atmospheres may result in a fire or explosion hazard.
The XP-hf systems are not approved for use in
hazardous locations unless the base model, all
accessories, all kits, and all wiring meet local, state,
and national codes.
See Wire Systems with Explosion-Proof Heaters on
page 22.
NOTE: See special conditions for safe use in your
Viscon HF Heater manual and your Viscon HP Heater
manual.

Series Change

The XP cart frame was upgraded to allow better access
to the pump lowers.
Series A and B
10
Series C
OEM Packages
Packages include XP-hf pump assembly and
connection components.
Building systems with OEM packages:
High-pressure fluid from gun, hose leaks, or ruptured
components may result in pierced skin.
• Over Pressure Protection must be used, see
page 9. See chart on page 18 to identify the over
pressure relief valves to use with your system.
• All components must meet or exceed maximum
working pressures.
Pump sizes are marked on the pump cylinder; sizes are
nominal. See the technical specifications in your pump
lower manual for actual displacement.
OEM packages require additional components to make
a complete system. See Fluid Control Assembly, page
15; Main Air Controls, page 16; and System
Components, page 18.
Benefits of the new frame include:
• Ease of use
• Ease of service and greater access to lowers
Series Change Description
C Upgraded XP frame
3A4381M