What Do I Need For Proper Cleaning - Keysight Technologies 81490A User Manual

Cleaning Information

What do I need for proper cleaning?

Standard Cleaning Equipment
58
Some Standard Cleaning Equipment
your instrument. For certain cleaning procedures, you may
also require certain
Before you can start your cleaning procedure you need the
following standard equipment:
• Dust and shutter caps
• Isopropyl alcohol
• Cotton swabs
• Soft tissues
• Pipe cleaner
• Compressed air
Dust and shutter caps
All of Keysight Technologies' lightwave instruments are
delivered with either laser shutter caps or dust caps on the
lightwave adapter. Any cables come with covers to protect
the cable ends from damage or contamination.
We suggest these protective coverings should be kept on the
equipment at all times, except when your optical device is in
use. Be careful when replacing dust caps after use. Do not
press the bottom of the cap onto the fiber too hard, as any
dust in the cap can scratch or pollute your fiber surface.
If you need further dust caps, please contact your nearest
Keysight Technologies sales office.
Isopropyl alcohol
This solvent is usually available from any local
pharmaceutical supplier or chemist's shop.
Keysight 81490A Reference Transmitter Module User's Guide, Edition 3.0
What do I need for proper cleaning?
is necessary for cleaning
Additional Cleaning Equipment.