Ip Setup Instructions - Toshiba IP5000 User Manual

Administrator Programming

IP Setup Instructions

IP Setup Instructions
The following steps must be completed before starting the telephone setup. The IP
password will be assigned by the Telephone Administrator and is the verification step
of the telephone registration with the CIX (xIPU).
To enter the Password
1. Press
2. Press
3. Press
...or
4. Press
5. Press
6. Lift the handset off-hook / on-hook to save the settings.
Telephone Setup
1. Press
2. Press
3. Press
(normally, use
1
: manual setting, then press
2
: auto setting by DHCP server, then press
4. Press
period in an IP address, press the
is "192.168.1.241," press
5. Press
mask address is "255.255.255.0, press
6. If the IP endpoint is connected to a router or other gateway device, press
Enter the router address, then press
manual setting.
7. Press
your telephone's primary number (PDN).
106
3 6 9
+ + + (simultaneously).
2
, then press
Next
(for 20 button phone)
Next Next
(for 10 button phone).
FB26
, then enter the Password.
.
3 6 9
+ + + (simultaneously).
2
, then press
FB1
to see if the DHCP server is in use or not. Press one of the following
1
: manual setting):
FB2
. Enter the IP address for this IP endpoint and press
FB3
. Enter the subnet mask number and press
FB5
. Enter a Station ID for the IP endpoint and press
for the Network Setting Mode.
to select the Network Setting Mode.
.
*
button on your dialpad (e.g., if the IP address
192 168 1 241
* * *
255 255
*
. Only used if Step 3, above, is set for
Strata CIX IP5000-series Telephone UG
. Go to Step 7 below.
).
. (e.g., if the subnet
255 0
* *
).
. This is usually
. To enter the
FB4
.
10/08