One Touch Buttons; Changing A One Touch Button - Toshiba IP5000 User Manual

User Programming

One Touch Buttons

One Touch Buttons
One Touch buttons can be used for storing frequently used features or dialled
numbers, such as Speed Dial numbers (use Speed Dial Codes to store additional
numbers). One-touch buttons can be preassigned to your telephone – your System
Administrator can help you identify them.
If you do not have a One Touch button, but you have an available Programmable
Feature Button, you can convert the Programmable Feature Button to a One Touch
button. Perform the procedure called
Button's Function" on page 97
Once you have created a One Touch button, you can change the function by using the
following procedure.

Changing a One Touch Button

1. Press
2. Press the One Touch button to be set.
3. Enter the digits or special buttons for the function to be dialled. You can include
the following in the dial string:
• Dial pad digits
• A maximum of 32 characters.
• Station and System Speed Dial index numbers can be entered. The Speed Dial
index number will automatically dial out on the extension or Line programmed
on the One Touch button with the associated Speed Dial index number.
• Function buttons, except One Touch or a
• Handset hooking (on-hook/off-hook) cannot be recorded.
4. Press the One Touch button to save the entry.
We suggest labelling the One Touch button on your button strip.
98
#9876
to enter User Programming Mode.
0 9
~ .To program special characters, see
"Setting/Changing a Programmable Feature
(in Step 4, enter the access code for One Touch button).
Program
Strata CIX IP5000-series Telephone UG
Table 13.
button.
10/08