Two (Tandem) Line Connection; Using A [Dn] Button - Toshiba DKT2004-CT User Manual

Features

Two (Tandem) Line Connection

Two (Tandem) Line Connection

Using a [DN] Button

This feature enables you to connect two lines, then drop out of the conversation.
➤
To connect two outside lines (using a [DN] button)
1. Press
talking to an external party
on a [DN] button.
2. Dial a line access code and
then the external telephone
number of the other party
(see
Page
Ask your System
Administrator for the
proper code to be used for
this type of call.
3. Press
party answers.
Press [DN] and then
original call if you receive
a busy tone/no answer.
4. Press
hang-up.
5. Press
80
while
"Access Codes" on
90).
after the
to return to the
and
.
You hear dial tone, the [DN] LED flashes at the
conference rate.
The [DN] LED lights steady and all parties are
conferenced.
You hear dial tone and the [DN] LED flashes at
the exclusive-hold rate.
The [DN] LED continues to flash at the
exclusive-hold rate and the two lines are
connected. The LED turns off when the external
parties hang up.
If the public telephone company provides auto
disconnect, the connection may release
automatically when the parties hang up. If not,
the lines must be supervised to be disconnected.
Strata DKT2004-CT Cordless Digital Telephone 9/00