Automatic Callback - Toshiba DKT2004-CT User Manual

Features

Automatic Callback

3. Press
the party to answer.
➤
To cancel ABR
➤
...or press [DN] +
Automatic Callback
After reaching a busy or Do Not Disturb station, you can set Automatic Callback
(ACB) to have the system call you back when the called station becomes available.
You can make other calls while waiting for the called station to become available.
➤
To set Automatic Callback (busy or DND stations)
1. Press
...or press .
2. Press
3. Answer within three rings
to prevent the callback
from being cancelled.
44
and wait for
Press
.
.
If the [DN] or Line is available, the [DN] or Line
and Spkr LEDs flash. The called telephone
number rings, and your telephone receives ring
tone.
If your station is busy, ABR does not
Note
attempt a recall.
If you do not press
a connection is made, you hear a muted ring for
another 30 seconds, then the call disconnects.
Busy tone stops momentarily, then you hear two
seconds of dial tone, then busy tone resumes.
The LED flashes at the incoming call rate.
Your telephone rings at a fast rate when the called
station becomes idle, and you hear a single tone
(LED lights steady).
The called station receives a voice announce call
from your telephone or, with Tone Signaling, you
hear ringback tone and the called station rings.
Strata DKT2004-CT Cordless Digital Telephone 9/00
within 30 seconds after