Line Queuing With Automatic Callback - Toshiba DKT2004-CT User Manual

➤
To cancel Automatic Callback (busy or DND stations)
➤
Press a [DN] +

Line Queuing with Automatic Callback

Automatic Callback enables a waiting queue for an available line after attempting
access to a line group when all lines are busy. The system calls you back when a line
becomes available.
➤
To set Line Queuing
1. Press
... or press .
2. Press
3. Lift the handset
immediately or press the
flashing [DN].
Strata DKT2004-CT Cordless Digital Telephone 9/00
If you receive a busy tone after answering the
callback, the called party has already received or
originated another call. Your request is not
cancelled.
+ .
The busy tone stops momentarily, then you hear
two seconds of dial tone, then busy tone resumes.
. You can make other calls while waiting for a line
to become available.
The [DN] LED from which you attempted to first
access the line flashes at the incoming call rate,
and your telephone rings at a fast rate.
Note
You hear CO dial tone. If you hear a busy tone,
the line has already been seized or has received
an incoming call. Your request is not cancelled.
You are called again the next time a line becomes
available. The Line or [DN] LED lights steady.
You must answer within three rings to
prevent the callback from being
cancelled.
Features
Automatic Callback
45