Message Waiting - Toshiba DKT2004-CT User Manual

Features

Message Waiting

Message Waiting
If you call a station [DN] and it is busy or its user does not answer, you can leave a
message waiting indication by pressing the
station flashes after you press the button. The user can call you back by pushing the
button with the flashing LED. (Voice mail devices, as well as people, can leave
message waiting indications.)
All telephones have a fixed
callers that called the [PDN]. Telephones that own [PhDNs] can also have flexible
message waiting [PhDN/MW] buttons/LEDs for receiving/retrieving messages left by
callers.
Each Message Waiting indication can accept up to four MW indications at each [DN]
or [PhDN] at one time. One of the indications for each [DN] is reserved for the
Message Center set in system programming.
➤
To answer a Message Waiting
1. Press
LED is flashing red. If
there is no answer, hang up
and try at a later time.
2. Press
receiving the message to
terminate the call.
3. Repeat the Steps to retrieve
additional messages.
The called party must answer—by either going off-hook or by pressing the
button—for the indication to be cancelled automatically.
➤
To cancel Message Waiting
➤
Press
64
button/LED for receiving/retrieving messages left by
when the Msg Your telephone rings the station or voice mail
device that set the indication. If there is no
answer, the LED continues to flash.
after Voice mail devices may cancel the indication after
a short delay.
The Msg LED flashes if you have more messages.
to answer The Msg indication is cancelled when the called
party answers.
button. The Msg LED at the called
Strata DKT2004-CT Cordless Digital Telephone 9/00