Table of Contents
Advertisement
C
Main menu 3
Use
to
select RD-GL2
or RD-GL3.
To top menu
To top menu
Use
or
to select Hardwire,
XON/XOFF, ENQ/ACK, Software,
Hard and XON, or Hard and ENQ.
Press
to enable the setting.
Use
or
to select. Press
[When RD-GLII instructions are selected]
ASCII (1), ASCII (2), French/German, Scand., Span./Latin,
Special, JIS-ASCII, Roman, Katakana, ISO-I.R.V., ISO-Swed.,
ISO-Swed.-Name, ISO-Norw. (1), ISO-German, ISO-French (1),
ISO-U.K., ISO-Italian, ISO-Span., ISO-Portuguese, ISO-Norw. (2),
ISO-French (2), Drafting-Set
[When RD-GLIII instructions are selected]
Roman 8, ANSI-ASCII, ECMA94-Latin-1, RDGL3 Special,
JIS-ASCII, Roman-Exten., Katakana, Kana-8, I.R.V., Swedish,
Swedish-Name, Norwegian (1), German, French (1), U.K., Italian,
Spanish, Portuguese, Norwegian (2), French (2), RDGL3-Drafting
Press
to set the factory default and return to the top menu.
Press
or
to return to the top menu without setting
the factory default.
F 1
Use
or
to select Normal or HighSpeed.
Press
to enable the setting.
Use
or
to select Default or Guide.
Press
to enable the setting.
Turn on when paper is set in the paper guide. (Refer to page 5.)
21
to enable the setting.
Advertisement
Table of Contents
