Table of Contents
Advertisement
Replace the lead in the pencil and reinstall in the pen stock. Press the
If the message prompting you to refill the leads appears even when leads have been refilled, there may be a pencil
lead that is jammed.
* Plotting is performed using the pen speed and pen force values set for each pen.
<Example of the Automatic Pencil Grouping Function>
Pen number
1
2
3
4
5
6
7
8
[Pencil Group] Lead Hardness Grouping
In addition to automatic pencil grouping, the DPX also supports
menu setting of groups according to pencil hardness. For example,
say a total of three pencils are installed in the pen stock in order
from number 1 to number 3. (These are two pencils with 0.3 mm
lead diameter and HB hardness, and one pencil with a 0.3 mm lead
diameter and B hardness.) Initially, because all pencil numbers are
set to Group M1, all three pencils are included in the same group.
However, by using the [Pencil Group] menu and setting the pen
stock numbers for the HB pencils to Group M1 and then setting the
B pencil to Group M2, the three pencils can be divided into two
separate groups. If the pencil lead in the number 1 pen stock
position cannot be used, the pen carriage automatically takes the
pencil in position 2 and continues plotting. However, if the same
occurs with the pencil in stock position number 3, the pen carriage
will not attempt to continue plotting.
<Example of Grouping>
Pen number
1
2
3
4
5
6
7
8
A Request
The DPX-3700A/2700A cannot use the single-lead pencil for the DPX-4600A/3600/2600/3500/2500/3300/
2200.
Be sure to use the multi-lead pencil for the DPX-3700A/2700A (60 mm type, M series).
Pen type
Multi-lead pencil 0.3 mm
Multi-lead pencil 0.5 mm
Ink pen
Ink pen
Multi-lead pencil 0.3 mm
Multi-lead pencil 0.3 mm
Multi-lead pencil 0.5 mm
Multi-lead pencil 0.5 mm
Pen type
Multi-lead pencil 0.3 mm HB
Multi-lead pencil 0.3 mm HB
Multi-lead pencil 0.3 mm B
Ink pen
Ink pen
Ink pen
Ink pen
Ink pen
15
key to restart plotting.
0.3 mm group
0.5 mm group
Top menu
Use
and
to select a pen number.
Use
and
to select a group.
Press
to enable the settings.
Group M1
Group M2
Advertisement
Table of Contents
