Roland DPX-3700A User Manual page 30

A
When
the pen carriage moves
towards the X
correct point.
When
the pen carriage moves
towards the Y
correct point.
Main menu 2
C
B
is pressed,
is pressed,
Adjust by pressing
Press
or
Adjust by pressing
Press
or
To main menu 1
Press to select whether 1 cm (3/8") or 5 cm (1-15/16") is to be the size of area replot.
Press to select ON (when marked with an asterisk) or OFF.
Use
Press
Press
Press
(Refer to page 7.)
ON (when marked with an asterisk) / OFF
ON (when marked with an asterisk) / OFF
PenMode: ON (when marked with an asterisk) / OFF
ON : Plotting is executed either according to the
pen forceand speed set by reading the marker
seals on the pen in the penstock. or according
to the manually set pen force and speed
(manual settings take priority).
OFF: Plotting is executed either according to the
pen force and speed set by the host computer
or software.
SuperFine (super-fine pen mode):
ON (when marked with an asterisk)/OFF
Set this to ON when using a 0.13 mm or
0.18 mm ink pen.
20
or .
to enable the setting.
or .
to enable the setting.
Press
and return to the top menu.
Press
top menu without area replot.
Press to replot and return to the top menu.
or to select DPX, Center or LL.
to enable the setting. (Refer to page 18.)
to execute a demonstration plot and return to the previous menu.
to return to the top menu without executing a demonstration plot.
ON (when marked with an asterisk) / OFF
ON (when marked with an asterisk) / OFF
Vector Sort: ON (when marked with an asterisk) / OFF
ON: When turned on, this collects similarly
located line data andsorts it. Plotting time
is shortened by eliminating wasted pen
movement.
Pen Sort: ON (when marked with an asterisk) / OFF
ON: When turned on, reduces the frequency of
pen change overs and sorts the data for
plotting.
Plotting time is shortened by eliminating
wasted pen movement.
(Refer to pages 25–32.)
to area replot
to return to the
(Refer to
pages 8–9.)