Table of Contents
Advertisement
Email Test: After the Email configuration portion of each UPS has been filled out, the user can test the connection by
entering this page. Click "Send Test Message" and the UPS will send an email to the email recipient
listed. If an email has been received, a "success" message shall display and the user can verify that an
email has been received at the recipient's email address.
Network Config: This portion of the webpage provides the user with the ability to modify the network settings for the
UPS. The MAC address of the UPS will be listed along with the Host Name, which is the currently
viewed UPS. It is recommended to change the Host Name for each UPS to something useful, such
as the location of the UPS. The user may assign a new IP address, Gateway, Subnet Mask, and
DNS address for the UPS. Changing these settings may disrupt network connectivity. Be sure to
click "Save Config" to save any changes made.
Page 30
Visit
gomultilink.com
for new product releases!
30
Advertisement
Table of Contents
Need help?
Do you have a question about the EDP Series and is the answer not in the manual?
Questions and answers