Midea RW145 Service Manual page 14

3 UNPACKING WAYS OF MAIN PARTS
19. Undo the NTC
I.Undo the top cover,
control panel, lower cover
and front plate.
II.Undo the NTC with
special tools.
20.Undo the door glass
I. Open the door, remove
two screws fixing the
hinge and front plate, and
then remove the door.
II. Remove six screws on
the inner door.
III. Remove the outer door
and the inner door with
special tool.
21.Undo the panel support
I. Undo the top cover
II.Undo the control panel.
III.Remove two screws
fixing the panel support,
and then remove it.
22.Undo the drum tub
assembly
I.Remove the motor in
II.Pull out the heater.
III.Remove the belt.
VI.Remove the screws
fixing the pulley, and then
take out the pulley.
V.Remove the screws fixing
the front and rear tub, and
then remove the tub.
VI.Remove the inner drum
kit.
14 14 14