Midea RW145 Service Manual page 11

3 UNPACKING WAYS OF MAIN PARTS
8. Undo the gasket
I.Undo the top cover,
control panel, lower
cover, machine door and
the front plate.
II.Remove the outer
gasket
clamp between the door
seal and the front plate.
III.Loosen the inner gasket
clamp between the door
seal and the front of the
outer tub.
9. Undo the PCB panel
Undo the top cover and
control panel
10. Undo the detergent box
I.Undo the top cover and
the control pane
II.Release the hose clamp
and pull out the inlet hose.
III.Release the hose clamp
and pull out the detergent
box hose, and then take
out the detergent box.
11. Undo the inlet valve
I.Remove the top cover
II.Undo 2 screws between
cabinet and inlet valve.
III.Release the clamp fixing
the inlet valve and the
inlet hose, and then pull
out the inlet hose.
IV.Take out the inlet
valve
11 11 11