Midea RW145 Service Manual page 9

3 UNPACKING WAYS OF MAIN PARTS
Operation
1. Undo the back cover
Undo four screws fit
between back plate and
cabinet, and then pull out.
2. Undo the top cover
I.Undo 2 screws fit back
Cabinet.
II.Push back the top cover
15mm until it leaves away
from the control panel,
and then take it down.
3. Undo the control panel
I.Departing the top cover
II.Draw out the detergent
drawer.
III.Loosen two screws fit
on the control panel .
IV.Loosen two screws fit
on the control panel.
V.Take out the control
Panel inclined from the
panel .
Picture
9 9 9