Table of Contents
Advertisement
3 UNPACKING WAYS OF MAIN PARTS
23.Undo the absorber
I.Lift out the outer tub kit.
II.Undo the absorber pin
between absorber and
rear tub, remove the
absorber.
24.Undo the motor
I.First let the machine lie
down on the back and
then pullout the motor
wire and grounding wire.
II.Use spanner to remove
the motor screw, and lift
up the motor with the
other hand in case of
falling to the drain pump
III.After two screws are
removed, change the
motor. First support it to
clasp the correct position,
then install the screws.
15 15 15
Advertisement
Table of Contents
