Midea RW145 Service Manual page 10

3 UNPACKING WAYS OF MAIN PARTS
4. Undo the lower panel
I.Open
release the screw on the
lower panel.
II.Turn the washing
machin back at an angle,
pinch the clasp ,and push
it out.
5. Undo the door lock
I.Open the door of
washing machine.
II.Take the outer gasket
Take the outer gasket
III.Remove two screws on
the door lock, and take
down the door lock.
IV.Take out the door lock
and draw out the plug.
6. Undo the front plate
I.Remove the lower cover.
II.Undo five screws in
front plate
III.Put the front plate up to
the clasp of the front plate
away from the loading
holder, and then take off
the front plate.
7. Undo the facade
counterweight
I.Undo the front plate
II.Remove six screws pull
out the facade
counterweight.
the filter cover,
10 10