Midea RW145 Service Manual page 27

5 TROUBLESHOOTING
Vibration of the washing
machine
The bubble spills from
the detergent
The machine stops when
the procedure has not
been finished
The drainage pump has
noise during the
operation when the water
has just been drained
To stop for some time
during the wash
procedure
If you cannot solve the above abnormal situations, would you please:
1. To turn the procedure knob to 【OFF】, pull out the attachment plug;
2. To close the water tap, and contact the nearest service center.
Level the washing machine.
Level the washing machine.
Fasten the footing.
To check if the internal packing for the transportation
have all been removed.
Check if the detergent is excessive, if it is the specialized
detergent for the cylinder washing machine.
Dip one scoop of the softener mixed with 1/2 liter of
water to the detergent box II.
Reduce the usage amount of the detergent in the next
time's wash.
Power failure or water cut.
The inner barrel water of the washing machine has been
drained but there is still a small amount of water in the
drainage pump and pipe. The drainage pump
continuously operates and takes in the air, and at this time
there is the noise, which is normal situation.
The washing machine adds water automatically.
Because there is too much bubble in the tube, the
washing machine is cleaning the bubble.
27