Default Setting Menu - Toshiba TDP-PX10 Owner's Manual

Using the menus (continued)

Default setting menu

Item
Projection mode
Language
Start-up screen
Auto input search
Fan mode
[See note below]
Lamp power
[See note below]
Power on
[See note below]
Reset all
Note
• Set the [Fan mode] to [High] when using the projector at the high altitude (higher than
600m or 2,000 ft.). In the mean time, the system will set the [Lamp power] to [Low]
automatically, and is not allowed to change the setting. Do not set Fan mode to [High]
when using the projector at a lower altitude.
• If [Power on] is set to [Auto] and there is a power outage, the projector will come on
once power is restored.
Description
Sets projection mode in accordance with
Placement Styles. p.24
(Standard)
Select one of the languages below for the menu
and messages.
[ : Enter setting mode]
[ : Apply]
English/ Français/ Español/ Português
Display start-up screen when power is turned on.
On Off
Set whether the input with signals is only
selected or not.
On Off
Sets the cooling fan speed.
Normal High
Sets the lamp power.
Normal Low
Sets whether to turn on the power when the ON/
STANDBY button is pressed (Manual), or when
the power is supplied (Auto).
Manual Auto
Press . (The language is not reset.)
Resets all adjustments and settings to their
factory settings.
Yes No
36
RGB
Yes
(Rear)
Yes
[ :Selection]
Yes
Yes
Yes
Yes
Yes
Yes
Video
Y/P /P USB
B R
S-video
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes