Connecting A Computer - Toshiba TDP TDP-MT700 Owner's Manual

English
Connecting S-video or video devices

Connecting a computer

Connect the projector to a computer with a VGA-BNC cable.
Laptop or desktop computer
If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, please check that the video source is turned on and operating correctly. Also check
that the signal cables have been connected correctly.
Many laptops do not turn on their external video ports when connected to a projector. Usually a key
combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/
LCD or a function key with a monitor symbol on the laptop. Press FN and the labeled function key simul-
taneously. Refer to your laptop's documentation to learn your laptop's key combination.
From audio output
To audio input
terminals
terminals
S-Video cable
Video cable
From audio output
terminals
VGA-BNC cable
To audio input
terminals
Connecting various equipment
19