Table of Contents
Advertisement
Operation: Respiration Profiles
22
Entering Respiration Rate
To enter a custom respiration rate press the [Set] key followed by the [Rate] key. The dis-
play should now read "Enter Resp Rate". Enter the rate in breaths per minute (BPM) using
the numeric keypad. Only whole numbers will be accepted as valid rates. Press the
[Enter] key to enter the selected rate. If the selected rate is not within the Safe Range
prompt will ask if you would like to override the Safe Range
Step
Entering Tidal Volume (Volume-control Mode Only)
• The inspiration and expiration volumes are always the same.
To enter a custom inspiration/expiration volume press the [Set] key followed by the
[Volume] key. The display should now read "Enter Tidal Vol". Use the numeric keypad
to enter the inspiration/expiration volume. Press the [Enter] key to enter the selected
volume. If the selected volume is not within the Safe Range
would like to override the Safe Range
Step
Publication 5404-001-REV-C
Key
Key
Display
™
value; see page 32.
Display
™
value; see page 32.
™
a prompt will ask if you
™
a
Advertisement
Table of Contents
