Table of Contents
Advertisement
Installation
9
Figure 4. Front Panel
Electrical Connections: Front Panel
Inspira provides four BNC type connectors at the front of the machine. Their func-
tions are as follows:
Sync Out
Produces a digital pulse at the start of the respiration cycle allowing synchronization
of other electronic equipment with Inspira's respiration cycle.
Trigger In
For use with equipment which uses a digital signal to start and stop respiration. An
example of this type of equipment would be a footswitch.
Analog Out 1
An analog signal representing the airway pressure within the ventilator. This signal
may be monitored with an oscilloscope.
Analog Out 2
Not used in this model.
Note: Electrical specifications for these signals are given in Appendix A.
Publication 5404-001-REV-C
Advertisement
Table of Contents
