Ip Camera Directly Connection; Analog / Cvi / Tvi / Ahd Camera Connection - EverFocus EN310 User Manual

3.2

IP Camera Directly Connection

LAN
3.3

Analog / CVI / TVI / AHD Camera Connection

The way to connect the Analog / CVI / TVI / AHD cameras are the same, here we use the CVI camera as an
example.
Connect the camera's video output to the Video Input of the device using the supplied BNC cable. Tap the
CVI icon (see Note below) and then you can see the camera streams.
You can also use the supplied RS-485 cable to connect the camera to the RS-485 port of the device to
control the camera.
Red Wire (+)
Black Wire (-)
EN310 4" Touch Screen Test Monitor
If your IP camera requires an independent power supply,
connect the LAN cable of the IP camera to the LAN port
of the device and then power up the IP camera with your
power supply. Check whether the LED indicators of the
LAN port are on:
• When the green LED is on, there is
10/100/100Mbps traffic
• When the orange LED is blinking, data is being
transferred
If your IP camera requires PoE power, connect the PoE
cable to the LAN port of the device and then turn on the
PoE power output function (IP Camera Test > POE power
output). Please refer to 4.1.1 PoE Power Output.
RS485 Cable
BNC Cable
4