Port Flashing - EverFocus EN310 User Manual

1. Prepare one tester and a computer. Connect the tester and computer on the same network with the
same network segment.
2. Install a network bandwidth testing software in the computer, as a test Client or Server, to do the
mutual testing with the tester.
3. If you use computer as a Server, on the tester, input the computer's IP address in the top-right IP
address field and then tap Start to test network bandwidth.
4. If you use the tester as a Server, on your computer, input the tester's IP address and start testing.
The result will be shown on the tester.
4.1.5.4

Port Flashing

Port Flashing is a useful tool for installer to easily and quickly find the right LAN port connected to the
tester. For example, if you connect the tester to a LAN port of a switch, when tapping the Start button,
the tester will send a signal to the switch to make the LAN port flicker at a special frequency. Installer
can easily tell the difference among the flicker signal. This function can be used to prevent from
artificial interruption of network connection such as mistakenly insertion, or to disconnect the non-
corresponding cables.
EN310 4" Touch Screen Test Monitor
23