Hik - EverFocus EN310 User Manual

4.1.6 HIK

Tap IP Camera Test > HIK
activating and debugging Hikvision IP camera.
1. If the connected IP camera is an unactivated Hikvision IP camera, the tester will automatically identify
and display "Unactivate"in safety mode. Select the IP cameras required to be activated and then
tap the Enable button. A pop-up window displays. Tap OK to activate the IP camera.
2. Input the password and tap OK to activate.
3. After activating the IP camera, the tester will modify the camera IP.
Play: Tap to enter the IP Camera Test page to display IP camera streams. For more details on IP
Camera Test page, please refer to 4.1.4 IP Camera Test.
Modify Network: Tap to change IP camera IP address, subnet mask or geteway.
Modify User: Tap to modify the user name and password of the IP camera.
Factory Reset: Tap to restore the IP camera to the factory default.
to enter the HIK test tool page. The HIK test tool page is designed for
26
EN310 4" Touch Screen Test Monitor