Scan - EverFocus EN310 User Manual

EN310 4" Touch Screen Test Monitor
Note that if the IP cameras or network devices are not configured properly or not plugged in, the PING
info will display "Destination Host Unreachable" or have 100% packet loss. On the contrary, if the IP
cameras or network devices are connected properly, the sending and receiving packets will have 0%
packet loss.
4.1.5.2

Scan

Connect a network cable to the LAN port on the tester and then tap the SCAN icon to enter the Scan
page. Set up the IP range and then tap Start to scan the IP address within the range. You can also input
an IP address in the Port Number Scan field to scan for open ports.
21