Link Monitor - EverFocus EN310 User Manual

Tap the Trace Route icon to enter the Trace Route page. Input an IP address or a domain name in the
Remote IP field. Set up a maximum hop count in the Hop TTL(ms) Address field (normally 30) and then
tap the Start button.
After tapping the Start button, the results will be displayed.
4.1.5.7

Link Monitor

The Link Monitor function can be used to see if an IP address is occupied by other network device, and
ultimately avoid network conflicts when adding IP devices.
Tap the Link Monitor icon to enter the Link Monitor page. Tap the Add button to input an IP address
and then tap the Start button.
EN310 4" Touch Screen Test Monitor
• Check mark
occupied.
• Cross mark
available.
• Click Stop to stop testing.
• If you want to test different network
segments, go to Settings > IP Settings to
change the IP settings.
25
means the IP address is
means the IP address is