Power On; Power Off; Disconnecting Ac Adapter - Tally Dascom DP-581H Operator's Manual

4.5 4.5

Power ON

1. Press the Power button on the operation panel.
2. The Power lamp and the Error lamp will show ON during the start up sequence.
3. The Error lamp will be turned OFF when the printer is ready to print.
4.6 4.6

Power OFF

1. Hold down Power button for about 3 seconds.
2. The power lamp turns OFF and the printer power will be OFF.
When battery volume goes below 10%, the Battery lamp will flash and when it is below 5% the
printer will shut down.
4.7 4.7

Disconnecting AC Adapter

Perform reversed steps described in 4.3.
Grab and pull the lock on connector when disconnecting the AC cable from the AC adapter's
inlet.
9