Table of Contents
Advertisement
Chapter 8
8.1
8.1
Cleaning
In normal environments, the printer should be cleaned after printing a few rolls of paper or if
there are voids in the printout. For optimum performance and life, you should clean the Print
Head and Platen Roller whenever you load new paper.
In order to clean the printer, prepare alchol, cotten swab, soft cloth, and air spray. Also prepare
mild detergent to clean the outer cover.
Before cleaning, turn off the printer, disconnect it from the AC Power Adapter and disconnect
Before cleaning, turn off the printer, disconnect it from the AC Power Adapter and disconnect
the USB cable and remove the paper.
the USB cable and remove the paper.
8.1.1 Print Head
To clean the print head as described below, use cotton swabs moistened with isopropyl
alcohol.
Do not clean the printhead while it is still hot after printing.
Make sure that isopropyl alcohol is completely evaporated before turning on the power.
Do not use sharp objects to clean the print head. This may damage the printer and require
service. Such damage is not covered under warranty.
Maintenance and troubleshooting
Maintenance and troubleshooting
19
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DP-581H and is the answer not in the manual?
Questions and answers